新闻资讯

News Center

current position: Home > News Center > Dynamic

News CenterNews

contact usContact Us

Dongguan Aiqun Industrial Co., Ltd

Contact:Mr Wang

Mobile :13713335011

Wechat:13713335011

Fax:0769-89783666

Tel :0769-89783666

Email:wym@oikwan.com.cn

Add  :5th Floor, Building D, No. 19                  Zhugang Road, Shatou,                          Chang'an Town, Dongguan City


Difference between Console cable and network cable

2023-10-07 11:50:25
times

Console cables and network cables are two different cables for different purposes, and they have some differences in their functions and characteristics.

1. Usage: Console cable is mainly used for serial console connection of computer devices and network devices for configuration and management of the devices. It is usually used to connect the console ports of switches, routers, firewalls and other network devices for configuration, troubleshooting and other operations. And the network cable (also known as Ethernet cable) is mainly used to connect computers, servers, routers, switches and other devices to form a local area network (LAN) or the Internet for transmitting network data.

2. Wire sequence: Console cable and network cable have different wire sequences: Console cable usually adopts the RS-232 standard wire sequence, while the network cable usually uses 8P8C (RJ45) connector, there are two kinds of wire sequence standards, which are T568A and T568B.

3. Wire specifications: Console cable and network cable also have some differences in the wire specifications. Console cable is usually used in the serial line, the internal is composed of multi-stranded wire, used to transmit serial signals. Network cable is usually twisted-pair cable, which consists of four pairs of twisted-pair wires and is used for transmitting Ethernet signals.

4. Transmission distance: Due to the different uses, the transmission distance of Console cable and network cable is also different, Console cable is usually used for short distance connection, usually 1-3 meters. Network cables, on the other hand, can support longer transmission distances, which can reach several hundred meters or even more depending on different Ethernet standards (e.g. 10BASE-T, 100BASE-TX, 1000BASE-T, etc.).

5. Transmission rate: The transmission rate of Console cable is generally low, usually 115200bps or lower. This is because Console cables are mainly used for device configuration and management, and the requirements for console output and input are not too high. And the transmission rate of the network cable can vary according to different Ethernet standards, commonly 10Mbps, 100Mbps, 1Gbps or even higher.

6. Network protocols: Console cables do not depend on any network protocols, they are mainly used for console connection and command line configuration of devices. While the network cable relies on the Ethernet protocol for data transmission and routing through Ethernet switches.

7. Connection interface: Console cable usually uses DB9 or RJ45 interface to connect with the console port of the device. And the network cable usually uses RJ45 connector to connect with the Ethernet port of the computer, server, switch and other devices.

Console cable,RS232 Cable,USB debugging cable

It is important to note that while there are some differences between Console cables and network cables, they also have some things in common. For example, they are both physically connected to enable communication between devices; they both require the correct wire sequence and connection to ensure signal transmission; and they can both use shielded wire to reduce interference and improve transmission quality.

In general, Console cables and network cables are two different cables for different purposes. Console cables are used for console connection and configuration of devices, while network cables are used for data communication between devices. They have some differences in terms of usage, transmission distance, and transmission rate. The choice of which cable to use depends on the specific application scenario and needs.

As a professional high speed cable manufacturer, Aiqun Industry has been producing and stocking a large quantity of Mini SAS cable, HD Mini SAS cable, SATA cable, USB industrial serial cable, USB debugging cable Console cable and other high speed cables for a long time, and supports customization. For business cooperation, please contact the following staff:

Mr. Wang Tel: 13713335011; Email: wym@oikwan.com.cn 

Mr. He Tel: 18027598835; Email: hejibin@oikwan.com.cn


Recently Viewed:

Related products

news.related_news